Espanol
German
Italiano
5-hole flange Kit PCD 130-150mm for Dynomag Hub
5-hole flange for Dynomag Hub, designed for applications with a PCD between 130 and 150 mm. The kit includes interchangeable centering rings for use on approximately 225 vehicle models.
Key features
-
Supported PCD: 5-hole configurations with a diameter between 130 and 150 mm
-
Wide compatibility: suitable for approximately 225 vehicle models from different brands
-
Complete kit: includes flanges and interchangeable rings with different centering diameters
Description
The 5-hole Dynomag Hub flange is designed to connect the Dynomag Hub system to vehicles equipped with fastening configurations featuring a PCD – Pitch Circle Diameter between 130 and 150 mm.
The PCD identifies the diameter of the circle on which the five wheel fastening holes or studs are positioned. Thanks to the interchangeable rings included in the kit, the flange can be adapted to hubs with different centering diameters, ensuring precise and stable installation.
This configuration covers approximately 225 vehicle models from numerous automotive brands, including the new BMW M5 G90 sedan and BMW M5 Touring G99.
Actual compatibility must be verified by considering both vehicle parameters:
-
Bolt Pattern / PCD, for example 5x132, 5x135, 5x139.7, or 5x140;
-
Center Bore / Hub Bore, meaning the diameter of the central bore of the hub.
Included configurations
|
Center Bore / Hub Bore |
Bolt Pattern – PCD |
Main brands |
|---|---|---|
|
66.6 mm |
5x132 |
BMW |
|
87.1 mm |
5x135 |
Ford, Lincoln |
|
94.7 mm |
5x139.7 |
Chevrolet, Chrysler, Daihatsu, Dodge, Ford, Kia |
|
95.3 mm |
5x139.7 |
Chevrolet, Chrysler, Daihatsu, Dodge, Ford, Kia |
|
98.5 mm |
5x139.7 |
Chevrolet, Chrysler, Daihatsu, Dodge, Ford, Kia |
|
63.5 mm |
5x140 |
Peugeot |
The table lists the main brands covered and does not constitute an exhaustive list of applications. Before purchasing, the specific PCD and centering diameter of the vehicle must be verified.
Package Content
| Quantity | Description |
|---|---|
| 2 | 5-hole Dynomag Hub flanges |
| 2 | Centering rings 66.6 mm – PCD 5x132 |
| 2 | Centering rings 87.1 mm – PCD 5x135 |
| 2 | Centering rings 94.7 mm – PCD 5x139.7 |
| 2 | Centering rings 95.3 mm – PCD 5x139.7 |
| 2 | Centering rings 98.5 mm – PCD 5x139.7 |
| 2 | Centering rings 63.5 mm – PCD 5x140 |
