Discover how to get your Dynomag Hub at a unique price: the car dyno signed Magicmotorsport can carry out accurate and repeatable tests. Robust and created out of a meticulous combination of electronic, technical and structural components, it doesn't need any permanent installation and can be easily stored after every use.
Main features:
Special Bundle - Automechanika Frankfurt 2024
On the occasion of the Automechanika Frankfurt 2024 trade fair, you can have the 2WD Dynomag Hub together with its cooling system at an unmissable price: €37.850 instead of 40699 euros, for a limited time only.
The meticulous combination of electronic, technical and structural components has been perfected to provide mechatronic workshops with a solid and precise dyno in any working condition.
The movement system, with a mixture of teflon and rubber wheels, makes it handy and easy to place in any workspace. In addition to that, its jointed axle makes the coupling procedure easier.
Each unit has an high-efficiency eddy current brake equipped with an optimized cooling system to ensure the best thermal and fluid-dynamic conditions.
The absence rollers and wheels increases safety up to the highest levels.
Control Totem equipped with a last generation proprietary software, Full HD monitor, high-performance processor and emergency buttons.
Since the very first use to daily operations, mechatronics can have commands, features, and analytics tools at hand.
The totem is ready to support both 2WD and 4WD configurations with the dedicated connection ports.
Two extra Schuko 220v power supply sockets are structurally available.
The modern and intuitive software stores the database of tested vehicles, knowing the vehicle's power is just the starting point, it can start Sweep Test, Constant RPM/Speed/Traction tests, and allows operators to compare several results of different rollings.
Since the very first guided configuration, the proprietary software - constantly updating - coordinates data fluxes coming from electronic tabs of each hub.
Switching from 2WD to 4WD is easy: you just need to connect 2 more hubs to the Dynomag Hub totem.
Differently from chassis dynamometers, where a U-joint or a belt connects the two axles, the hub scalable system is synchronized electronically, not mechanically.
The coupling procedure with the vehicle remains the same, thanks to the wheel hub and centering rings designed specifically for Dynomag Hub.
The dual fans dyno cooling system is specially designed for cooling car engines during testing.
The robust and efficient fan housing is made of carbon steel, which gives the device exceptional structural strength. The powder coating provides a layer of protection against wear and gives a professional and durable look.
The Magicmotorsport cooling fans system, ideal for use with the Dynomag line of dynos, ensures reliable performance and an advanced design that satisfies even the most demanding dyno tests.
The Red Dot Award: Product Design acknowledges the best products of the year.
Aesthetics, functionality, brightness and innovation are the pivotal elements guiding the winners, who stood out for the excellence of their Industrial Design.
Dynomag Hub was judged by international experts in the "industrial equipment" category.
Denomination | // | Hub Dynamometer for vehicles |
Model | // | Dynomag Hub |
General power supply voltage | [VAC ] | Three-phase: 400 |
General supply frequency | [Hz] | 50 |
Level of sound pressure in the workspace | [dB(A)] | < 70 |
Temperature in the workspace | [°C] | [0 ; + 40] |
Max. humidity in the workspace | [%] | 85 |
Possible transmissions | // | Manual, Automatic, CVT (lock mode) |
Operating voltage | [VAC ] | Three-phase: 400 |
Max. absorbed power | [A] | [A] |
Load type | // | Inductive |
Power output | [VAC ] | Three-phase: 5 x 400 Single-phase: 4 x 240 |
Max. output power | [A] | Individual three-phase (5 outputs): 20 / Total single-phase: 16 |
Safety systems | // |
Differential circuit breaker: Three-phase: 20 A curve C, IΔN = 0.03A Type A individual for each output Single-phase: 16 A curve C, IΔN = 0.03A Type AC overall |
Totem weight | [Kg] | 180 |
Max. Totem size | [mm] | 1720 x 950 x 920 |
Single-hub electric current | [A] | 16 |
Max. hub rotation | [rotation/min] | 3000 |
Max. braking torque | [Nm] | 1600 |
Max. Camber/Toe angles | [°] | -+ 8 |
Hub Weight | [Kg] | 500 |
Max. Hub size | [mm] | 1300 x 950 x 750 |
Wheels | // | Allow an easy tilting of the hub and facilitate its repositioning |
Electric current | [A] | 32 |
Max. braking torque | [Nm] | 3200 |
Max. braking power | [CV/rpm] | 800 / 2000 of the axle |
Max. axle load | [Kg] | 3000 |
Electric current | [A] | 64 |
Max. braking torque | [Nm] | 6400 |
Max. braking power | [CV/rpm] | 1600 / 2000 of the axle |
Max. axle load | [Kg] | 3000 |
Dynomag Hub 2WD + Cooling System
Special Price €37.850,00 instead of 40699 euros
For a limited time only.
Sku Code | Description | |
DNH02.001 | Dynomag Right Hub | |
DNH02.002 | Dynomag Left Hub | |
DNH03.001 | Dynomag Hub Assembled CAN cable | |
DNH03.002 | Dynomag Hub Three-phase power cable | |
DNH01.005 | Dynomag Hub Centering Ring Kit | |
DNH02.000 | Dynomag Hub Totem |